ICOM ICF-6062 UHF ANALOGUE MOBILE TRANCEIVER
- USED ITEM
Unmarked unit complete with microphone in perfect working order.
ICOM IC-F6062 UHF PMR MOBILE TRANSCEIVER RADIO.
Announcing the debut of the IC-F6062 mobile transceiver series. This series, has many attractive features that make it ideal for the commercial radio market including full-dot matrix LCD, detachable front panel, multiple signaling and voice scrambler. In addition to this, the IC-F6062 is the first Icom mobile radio compatible with the 6.25kHz digital mode.
Two versions available
Two transceivers make up thisfamily of products. The series is divided into the IC-F5062 for VHF and the IC-F6062 for UHF.
Detachable front panel
The optional RMK-3 and separation cable* allows you to detach the front panel from the main unit. This provides a variety of mounting possibilities for the transceiver.
Optional RMK-3 and one of either OPC-607/608/609 are required. Multi-functional dot matrix LCD
The IC-F6062 incorporates a backlit dot matrix LCD. Up to 24 characters can be displayed with the option of 1 or 2 line display.
Front mounted loud speaker
The IC-F6062 series has a front mounted speaker, which provides loud audio sound during operation.
512 memory channels, 128 memory banks
Up to 512 memory channels can be divided into 128 memory banks that allow you quick access to the intended channel. Each memory channel stores a variety of settings, such as output power, tone frequency, scan list etc. Wide, middle, narrow channel spacing is programmable per channel.
The solid die-cast chassis and polycarbonate front panel are resistant to shock and vibration. The remote control unit has a water resistant construction, equivalent to IP54, providing reliable operation in harsh conditions.
The IC-F6062 series has all of the popular signalling systems as standard. 2-Tone, 5-Tone, DTMF, CTCSS, DTCS, BIIS FFSK are all built in.
BIIS 1200 compatible
The following selective calling and data message features are available.
Up to 95-character SDM (Short Data Message)
8 SDM transmit memories (Up to 12-characters each)
Own ID and 7 Group IDs registration
Digital ANI (Automatic Number Identification)
Max. 6 received SDM and message history and max. 3 received call history capability
Alphanumeric memories show memory name, instead of calling number
Position data transmission with a GPS receiver
Compatible with Icom UK systems products (RMS, I-LOC & I-Read)
Multiple 2-Tone, 5-Tone signalling
The IC-F6062 series can decode ten 2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received, many actions are programmable for each code such as beep sounds, bell icons, answer back calls, external out, ringer sound, stun/kill radio, scans and so on. 40 pairs of CTCSS/DTCS memory channels are also available.
6.25kHz digital mode ready
With the optional UT-119H, the IC-F6062 series provides 6.25 kHz digital narrow mode communication which meets the FCC 6.25 kHz emission mask requirements for narrow banding. It increases efficiency of channel allocation and use of spectrum. The IC-F5062/F6062 series has one optional slot for the digital unit and one for other optional units. So a two unit combination, such as voice scrambler and digital unit, is possible.
The IC-F6062 series has a built-in inversion type voice scrambler. The optional UT-109R/UT-110R are available when a more secure scrambler system is required.
ENHANCED SCANNING FEATURES
scanning features have been added allowing easier migration from other brand radios to the Icom radio.
Scanning list and scanning type
The IC-F6062 series has 17 scanning list memories. Each scanning list consists of memory channels to be scanned and scanning type setting. Scanning type setting is selectable from 3 types. The voting scanning (one of the scanning type settings) detects the S-meter level of repeater stations and automatically selects the strongest station. Primary scan and secondary scan channels are also programmable.
Slave mode scan
In the normal mode scan, a user can select a scanning list independent to the channel setting. However, in the slave mode setting, the memory channel contains the scanning list selection. When users change the operating channel, the scanning list automatically changes following the channel setting.
A convenient feature that when the user changes an operating channel or moves to a different operating area, they don?t have to change the scanning setting.
Tx channel setting
The Tx channel which the radio works when user pushes the PTT button while scanning can be programmable per scanning list. Start channel, last detected channel, priority and pre-programmed channel are selectable. In addition, display setting while scanning is also programmable.
Talk back function
While scanning stops or resumes after a pre-set time, the talk back function allows the user to send a message on the channel detected during scanning, prior to the Tx channel setting. The talk back timer beep alerts you of the end of the talk back time with a beep sound. The user can easily make a quick response with this function.
Nuisance delete ... User can temporary skip a busy channel from the scanning list.
Monitor key action ... User can stop a scan when pushing the monitor button.
Built in Audio compander
D-SUB 25 pin ACC connector.
Ignition sensing line (pig tail)
Microphone hanger action programmable (Scan, monitor, priority channel)
Power on password
Convenient key assign sticker is supplied
HM-152 heavy duty microphone supplied as standard
±1.0ppm frequency stability